Morphy Richards GrimeBuster steam cleaner Vacuum Cleaner User Manual


 
1 The jet nozzle can be attached either
directly to the handle or via the
extension tubes.
The closer you hold the jet nozzle to the
object to be cleaned, the better the
cleaning results will be.
The round bristle brushes can be
snapped onto the end of the jet nozzle.
The nylon brush is suitable for most
cleaning applications such as, grout,
tapware, toilets, bathrooms, fridge seals
and sliding door runners.
The metallic brush is suitable for more
stubborn dirt where a more abrasive
action will not affect the surface, such as
BBQ plates and lime scale in toilets.
Sanitising and removing dust mites,
allergies from bedding and upholstery
Fit the triangular nozzle with cotton cloth
fitted and pass the steam slowly and evenly
over the surface ensuring all areas are
treated. Repeat the process. Leave the
mattresses to dry thoroughly before
covering.
Triangular brush Û
Recommended applications include:
- bedding for removal of dustmites and
their allegens. Allow mattresses to dry
naturally.
- smaller washable areas, such as:
kitchen and bathroom surfaces
- car interiors
- upholstery
Integrated window cleaner Ú
1 Fit the window cleaner to the handle
(attach extension tubes if required).
2 To ‘steam clean’ the surface, place the
thick rubber of the accessory head
against the glass, whilst releasing the
steam. Keep the steam control switch Ê
pressed until the entire surface is
covered with steam.
3 To remove excess water turn the
accessory head around with the
squeegee against the surface. Move the
squeegee in straight passes from top to
bottom. Wipe the rubber blade and the
bottom edge of the window dry after
each pass.
Professional iron ˜(certain models only)*
The high steam professional iron
produces up to 6 times more steam than a
normal domestic iron and is up to 4 times
faster.
Note: Do not stand the iron on its end,
always place it with the soleplate down on
the iron pad ¯ supplied.
1 Firmly insert the plug of the iron into the
machine socket of the cleaner until it
locks in place.
2 The temperature setting on the iron
needs to be set to the correct setting for
the fabric concerned.
3 Press the steam on/off button on the
machine. Both orange lights will come
on. The light on the iron will turn off
when it has reached the desired
temperature.
4 When the steam is ready for use and the
iron is hot, place your thumb on the large
switch located at the top of the iron, to
release steam.
5 Release some steam away from the
fabric before commencing ironing until a
steady flow of steam comes out.
6 The iron can be used vertically to
‘steam-iron’ curtains, dresses etc.
7
70515+70516 Rev 1 19/5/04 3:59 PM Page 7