Filter
Top Products
9 Remove the belt tunnel blanking plate Ó.
10 Place one end of the new belt over the
motor shaft and the other around the
pulley end of the brush L.
11 Make sure both brush end plates Ô are
fitted.
12 Place the belt tunnel blanking plate over
the belt and push end into its guide slot.
13 Align brush end plates with their guide
slots and push the brush down into
place.
14 Re-fit the belt cover.
15 Re-fit the main cover. Push the carpet
height adjustment knob back on - do not
over tighten.
16 Replace the two screws on the top of the
cover and the three screws underneath
the floor nozzle.
Helpline
If you have any difficulty with your
appliance, do not hesitate to call us. We’re
more likely able to help than the store from
where you bought the product.
Please have the following information
ready to enable our staff to deal with your
query quickly:
•Name of the product
• Model number as shown on the
underside of the appliance.
7
Helpline
& order line
for replacement parts
UK 08450 777700
Eire 1800 409119
L
K
Ï
Ó
Ô
8407 Upright EcoVac ib 4 03/12/2002 1:34 PM Page 7