Filter
Top Products
A. Carefully lift fan assembly onto
mounting bracket. Rotate fan so that
the notch on the ball engages the
ridge in the mounting br
acket. This
will allow hands-free wiring.
Install mounting bracket to outlet
box in ceiling using the screws and
washers provided with the outlet
bo
x.
10
R
emove canopy and downrod from polyfoam.
Slide canopy over downrod as pictured. Feed
lead wires through downrod and install down-
rod into fan yoke. Install cross pin with locking
w
asher through yoke and downrod making sure
to tighten securely.
Install set screw into yoke
a
nd tighten securely.
7
While the fan assembly is still on the
ground thread the safety cable
through the mounting bracket.
8
L
ift fan assembly and install the safety cable
directly to the building structure using the 3”
l
ag screw and plain washer provided. Before
p
roceeding to the next step make sure that the
c
able is properly installed and will support the
fan weight. Make sure the screw washer and
safety cable are installed using the order pic-
tured above.
Installation
11
safety cable
mounting
bracket
downrod
c
anopy
crosspin
yoke
9