Monte Carlo Fan Company 5VYR56XXD Fan User Manual


 
Lift Canopy to ceiling aligning the key hole slots
with the screws on the bottom of the Mounting
bracket. Rotate the canopy Counter Clockwise
to lock in place. Tighten the screws to secure
the Canopy. See inset for Keyhole shape
24
A
ttach blades to blade arms with
screws and w
ashers supplied. R
epeat
for all 5 blades.
30
Re-install safety bar removed in step
3 by placing safety bar on screws,
sliding into place, and tightening the
2 screws.
20
Make
wire connections to power source using
w
ire nuts provided. Make sure that no filiments
are outside of the wire nut. After making the
wire connections, the wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and ungrounded conductor on
the other side of the outlet box.
23
Install 4 x 25 watt candelabra bulbs.
26
Install assembled ornate glass cover
and glass to fan body by twisting in
direction of arrow to hold in place.
28
Tighten all 3 screws securely loos-
ened in step 25.
29
Loosen 2 screws with key hole slots
and remove 1 screw.
25
Place glass into ornate glass cover.
27
Install remote receiver by sliding into
opening in the Mounting bracket. Make
sure that the dip switches on the
Transmitter and the Receiver are set to
the same position.
21
Fan and light kit combinations over 70 lbs, in
b
oth flush and downrod mode the safety cable
must be installed into the house structure
beams using the 3” lag screws,washers, and
l
ock washers. provided. Make sure that when
the safety cable is fully extended the lead wires
are longer than the cable and no stress is
p
laced on the lead wires.
19
Safety cable installation
Safety Cable
L
ag Screw
s
afety
cable
3” lag
s
crew
l
ock
washer
w
asher
white
black
Make wiring connections as indicated above.
White from fan to white from remote marked
N. Orange from fan to Orange from remote
mark
ed Light/up
. Blue from fan to blue from
remote marked down light. Black from fan to
Black from remote mark
ed L. White from
house to white from remote marked AC N .
Black from house to Black from remote
marked AC L. Connect all green ground wires
to Ground wire from House.
orange
blue
Green
white
black
House
Fan
22
fuses