Filter
Top Products
Install wall control unit to outlet box
using machine screws provided.
36
A
ttach front co
v
er to wall control
with screws provided.
37
Remove cover by snaping off from
top or bottom. Install 12V battery
into wall remote. Duracell MN21 /
Eveready A23 / GP 23A all 12V.
34
Attach cover of remote by placing
over buttons and snaping into place.
35
To control fan speed select from High, Medium
or low speed buttons. To turn the fan off press
the Fan on / off button. To dim upper lights
press and hold U/L botton. To dim Lower lights
press and hold D/L button. To turn off either
up or down light press and quickly release
either U/L or D/L button. Press button mark
ed
REV to reverse the rotation direction of the fan
blades
Fan speed
control but-
tons
Fan on / off
Light dim-
mer for up
and down
lights
Fan
reverse
button
38
Attach glass by locating dimples in
light kit with the groves in glass and
twisting clockwise till tight.
33
Install the 100 watt halogen bulb.
D
o not touch bulb surface as oily
residue from skin can cause the bulb
t
o explode.
32
Place light kit over screws and twist
light kit with key hole slots into
place. Replace screw removed and
then tighten all 3 screws securely.
31