Filter
Top Products
Install wall control unit to outlet box
using machine screws provided.
25
Attach front cover to wall control
with screws provided.
26
To control fan speed select from High, Medium
or low speed buttons. To turn the fan off press
the Fan on / off button. To dim upper lights
press and hold U/L botton. T
o dim Lower lights
press and hold D/L button. To turn off either
up or down light press and quickly release
either U/L or D/L button. Press button marked
REV to reverse the rotation direction of the fan
blades
Fan speed
control but-
tons
Fan on / off
Light dim-
mer for up
and down
lights
Fan
rev
erse
button
27
Remove cover by snaping off from
top or bottom. Install 12V battery
into wall remote. Duracell MN21 /
Eveready A23 / GP 23A all 12V.
23
Attach cover of remote by placing
over buttons and snaping into place.
24
Attach blade brackets to blades using
the blade bracket screws and wash-
ers provided.
19
Check the motor for plastic shipping stabilizer
t
abs, and remove them if they are present. The
screws, washers and motor pads are pre-
i
nstalled to the blade holders. Attach blade
a
ssembly to motor and tighten screws securely.
21
22
After attaching blades; install the
switch housing cap using the three
screws previously removed.
B
efore attaching the blades remove
the switch housing cap. Save the
t
hree screws.
20