Filter
Top Products
40 27D8520
LOG PLACEMENT
Figure 137 - Sliding Shield Plate Down Back of
Burner Pan
Burner
Pan
Shield
Plate
MODEL VWF36/30WP WEATHERED PINE LOG
1. Slide shield plate down back of burner pan. See Figure
137.
2. Place Rear Log #1 on back of grate. Left side should fit
on grate in front of rear stand. Right side goes on the
rear stand of grate. See Figure 138.
3. Place Bottom Right Log #2 along outside of grate. Rest
end on Rear Log #1. Control knob will stick through
bottom notch of log. See Figure 139.
4. Place Bottom Left Log #3 on grate. The “V” of the log
should straddle the end grate bar. See Figure 140.
5. Place Top Right Log #4 on Bottom Right Log #2 resting
on grate. See Figure 141.
Figure 138 - Placing Rear Log #1 on Back Grate
Rear Log Rear
Stand
of
Grate
Bottom Right Log (#2)
Top Right
Log (#4)
Figure 139 - Placing Bottom Right Log (#2)
Figure 141 - Placing Top Right Log (#4)
Bottom Left Log (#3)
“V” Straddling
Grate Bar
Figure 140 - Straddling “V” of Bottom Left Log
(#3) on Grate Bar
Control
Knob Will
Go Here