30 27D8520
LOG PLACEMENT
MODELS VWF18 SPLIT PINE
1. Slide shield plate down back of burner pan. See Figure
92.
2. Place Left Front Log #1A on front left of grate. See
Figure 93.
3. Place Right Front Log #1B on front right of the grate.
See Figure 94.
4. Place front end of Side Support Log #2 on top left of
Log #1A. Rest other end of Log #2 on rear grate bar.
See Figure 95.
5. Fit cutout in the bottom left of Rear Log #3 over the
back end of log #1A. Rest right end of Log #3 on rear
grate bar. See Figure 96.
Continued
Figure 92- Sliding Shield Plate Down Back of
Burner Pan
Burner
Pan
Shield
Plate
Figure 94 - Placing Right Front Log (#1B) on Grate
Right Front Log (#1B)
Side Support Log (#2)
Figure 95 - Placing Side Support Log (#2) on Top
Left of Log #1A
Figure 93 - Placing Left Front Log #1A on Grate
Left Front Log (#1A)
Figure 96 - Installing Rear Log #3
Rear Log (#3)