Filter
Top Products
36 27D8520
LOG PLACEMENT
Figure 122 - Sliding Shield Plate Down Back of
Burner Pan
Burner
Pan
Shield
Plate
MODEL VWF24/18WP WEATHERED PINE LOG
1. Slide shield plate down back of burner pan. See Figure
122.
2. Place Rear Log #1 on back of grate. Left side should fit
on grate in front of rear stand. Right side goes on the
rear stand of grate. See Figure 123.
3. Place Bottom Right Log #2 along outside of grate. Rest
end on Rear Log #1. Control knob will stick through
bottom notch of log. See Figure 124.
4. Place Bottom Left Log #3 on grate. The “V” of the log
should straddle the end grate bar. See Figure 125.
5. Place Top Right Log #4 on Bottom Right Log #2 resting
on grate. See Figure 126.
Figure 123 - Placing Rear Log #1 on Back Grate
Rear Log
(#1)
Rear
Stand of
Grate
Bottom Right Log (#2)
Top Right Log (#4)
Figure 124 - Placing Bottom Right Log (#2)
Figure 126 - Placing Top Right Log (#4)
Bottom Left Log (#3)
“V” Straddling
Grate Bar
Figure 125 - Straddling “V” of Bottom Left Log
(#3) on Grate Bar
Control
Knob Will
Go Here