18 86D0024
FP2006
secure to floor
1. Center the gas log unit on the replace or rebox. Make certain the front of the burner sits
inside the front edge of the replace or rebox.
2. Anchor holes are located on the right and left sides of the unit. After centering the burner cor-
rectly, mark the hole positions on the replace/rebox oor. Drill two (2) 5/32" diameter holes
approximately 1
1
/2" deep.
3. Anchor the burner to the replace/rebox oor using the screws provided. Figure 13
Figure 13 - Secure Heater to Floor of Fireplace/Firebox
Screw
Anchor Hole
Screw
WARNING
FP2006