Filter
Top Products
HBDV7 Series Direct Vent Gas Fireplace
54D8000
41
1. Release two clamps on bottom of fireplace. Figure 59
. Tilt glass frame out and lift glass frame up until it clears three tabs on top of
fireplace.
3. Set glass frame aside.
FP2588
remove glass frame
FP588
Figure 59 -
Remove Glass Frame
Glass Frame
Clamps
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1. Remove glass door frame and log set.
. Remove the glass heat shield, baffle and rear bracket.
3. Install the center firebrick panel on the back wall first. Stand firebrick panel straight up against
the back of fireplace with the bottom edge at bottom of inner firebox.
4. Repeat Step 3 with the left and right side firebrick panels. Secure the top of each side firebrick
panel to the fireplace with one retainer bracket and one screw.
5. Use a screw gun to drive in the self-drilling screw into the sheet metal through the hole in the
retainer bracket.
6. Re-install glass heat shield, baffle and rear bracket.
7. Re-install glass door frame and log set.