Filter
Top Products
20
CWC Series Woodburning Fireplace
87D1504
Round Top Termination Top used to terminate chimney at roof. RLTSK8
(SK8) (Flashing not included.)
Round Top Termination - Top used to terminate chimney at chase. RLTSK8L
Extended (SK8) (Flashing not included.)
Flashing Metal finishing required around Contemporary 8-6-12 with 8" flue:
Termination to prevent rain leakage. 0-6/12 pitch
8-12-12 with 8" flue:
6/12-12/12 pitch
Square Top Housing Top housing of simulated brick pattern S20BR(Red)
available in red, tan or white. Appropriate S20BT(Tan)
adapter required. Flashing included. S20BW(White)
Housing Extensions Extends Square Top Housing on steep pitched 202036
roofs. (Specify red, tan or white)
Square Shroud Square knockdown shroud for RLTSK8L SKDSBL
(SK8) chase applications. (Black)
Square Chase Termination Housing used to terminate chimney through CT100
a chase top. (Unpainted finish)Appropriate
adapter (CTSK) required.(Flashing not included.)
Pyramid Shroud Pyramid knock-down shroud for RLTSK8L PKDSBL
chase application. (Black)
Chase Top Housing Low profile pyramid-style chimney cap used to PLTSK8
(SK8) terminate chimney through a chase. Includes
adapter. (Flashing not included.)
Chase Top Housing Square chimney cap used to terminate chimney SLTSK8
(SK8) through a chase. Includes adapter.
(Flashing not included.)
SK8 Chimney Sections Pipe used to build 8" (SK8) flue systems. SK81 (1' Long)
SK818 (1Z\x' Long)
SK83 (3' Long)
SK84 (4' Long)
SK8 Chimney Elbows Elbow used to create an offset in an 8" SK830-2
chimney system. Only 30˚ elbows available.
Packaged 2 per carton (offset and return).
Firestop Required at each floor level of chimney SKFS2A —
(SK8) installation. (Plus attic on multi-story installation.) (8" straight flue)
SKFS6A —
(8" 30° inclined flue)
Chimney Support Used to support chimney for each of: 30' vertical SKCS8
(SK8) height and 6' of angled chimney run.
Chimney Sections Pipe used build 8" (3-wall) flue systems. 81 (1' Long)
(3-wall) 818 (1Z\x' Long)
83 (3' Long)
84 (4' Long)
Chimney Elbows Used to create an offset in an 8" chimney system. 830A-2
(3-wall) Only 30° elbows available.
Packaged 2 per carton (offset and return).
Round Top Termination Top used to terminate chimney at roof. RLTS8
(3-wall) (Flashing not included)
Round Top Termination Top used to terminate chimney at chase. RLTS8L
Extended (3-wall) Adapter kit included. (Flashing not included)