Mitsubishi Electronics SKM25ZD-S Air Conditioner User Manual


 
11
2
Present time setting procedure
When inserting the batteries, the present time is automatically set to PM 1:00.
Example: Set to AM 10:30.
Press the TIME switch.
Press with the tip of a ball pen, etc.
The time indicator blanks and can be set to the current time.
Press the or button.
(Set to AM 10:30)
Press the RESERVE button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer is set on the basis of the present time, so please set it correctly.
1
3
NOTE
Press within
15 sec.!
HI POWER
TEMP
ECONO
AIR FLOW
CANCEL
ON OFF
RESERVE
TIMER
TIME
ACL
FAN SPEED
ON
MODE
LO
MED
HI
AUTO
TIME
OFF
HI POWER
ECONO
AM
1
2
OFF-TIMER operation procedure
The unit stops automatically at the end of the set period of time.
3
Example: You wish it to stop PM 10:30.
If the air conditioner is not operating, aim the remote control at the air conditioner.
Press the ON/OFF button.
Press the OFF TIMER button.
OFF TIMER indicator
OFF
is blinking.
Press the or button.
Each time the button is pressed, the indicator is switched in the order of:
AM
0:00
AM
0:10
AM
0:20
... ...
AM
1:00
AM
1:10
Each time the button is pressed, the indicator is switched in the order of:
AM
0:00
PM
11:50
PM
11:40
... ...
PM
11:00
PM
10:50
Set at PM 10:30.
Press the RESERVE button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
The unit stops at the end of the set period of time.
HI POWER
TEMP
ECONO
AIR FLOW
CANCEL
ON OFF
RESERVE
TIMER
TIME
ACL
FAN SPEED
ON
MODE
LO
MED
HI
AUTO
TIME
OFF
HI POWER
ECONO
OFF
PM
4
Changing of set time
Set a new time by using the OFF TIMER button.
Depending on the temperature, the operation may be stopped earlier than the set
time.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
NOTE
RWA012A226_En 03.8.27, 6:47 PM11