Mitsubishi Electronics RJD012A200G Air Conditioner User Manual


 
–7–
Unit display section
Name of each part and its function
Buzzer sound for remote control
When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.
When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (Pi) is produced.
This function is useful for operating the air conditioner in the darkness.
NOTE
Preset temperature
Air flow setting
RUN (HOT KEEP) light (green)
Illuminates during operation.
Blinks when airflow stops due to the ‘HOT
KEEP’
and
CLEAN operation
’.
Page 16
ECONO light (orange)
Illuminates during ECONOMY operation.
TIMER light (yellow)
Illuminates during TIMER operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
Blinks during heating preparation.
Unit ON/OFF button
This button can be used for turning on/off the
unit when remote control is not available.
Page 8
Remote control signal receiver
ON
OFF
1.5 sec.
0.5 sec.
HOT KEEP
3 sec.
1 sec.
ON
OFF
CLEAN operation
Ceiling suspension type
Ceiling recessed type
Air outlet (Local arrangements part)
Remote control signal receiver
Air inlet grill
(Optional part or Local arrangements part)
Remote control signal receiver
Air outlet (Local arrangements part)
Air inlet grill
(Optional part or Local arrangements part)
Representative installation examples
1.5 sec.
ON
OFF
0.5 sec.
RJD012A200G_EN_001-022 4/21/14, 13:437