Filter
Top Products
–17–
Turn off the power supply.
Maintenance
Do not use the following articles:
• Hot water (40°C or more)
It may deform or discolour the unit.
• Petrol, paint thinner, benzine or cleanser,
etc.
They may deform or scratch the unit.
Do not touch the aluminum fins on the
heat exchanger.
Before maintenance
Do not spill any liquid.
• There's a danger of elec-
tric shock.
• Wipe the unit with a soft,
dry cloth.
During the operational season
Cleaning the air filter
Please request cleaning of the air filter from special contractor.
* The air filter that comes with the unit cannot be washed with water.
Stop the unit and turn off the power supply.
The unit consumes appr. 2W even when the unit is not operating.
Turning off the power supply will help saving energy consumption and cost.
At the beginning of the season
Make sure that there are no obstacles blocking the
airflow around the air intake and outlet openings of
the indoor and outdoor units.
NOTE
Cooling/heating is affected by an air filter clogged up with dust etc., and the operation noise becomes louder. It may also
use extra electricity. Please clean the air filter at appropriate intervals.
1
2
Remove batteries from the remote control.
Clean both the indoor and outdoor units.
Set the temperature setting for approximately a half
day at 30°C and perform the cooling operation.
Dry the inside of the unit.
3
4
5
Check if there is no corrosion or rust on the base
frame of the outdoor unit.
Insert batteries in the remote control.
Turn on the power supply.
1
2
3
4
5
6
At the end of the season
Clean and reinstall the air filters.
* The air filter that comes with the unit cannot be washed with water.
Ensure that the air filters are clean.
* The air filter that comes with the unit cannot be washed with water.
Ensure that the earth wiring is not snapped nor dis-
connected.
RJD012A200G_EN_001-022 4/21/14, 13:4417