Filter
Top Products
33
(3) Auto vane control
Auto vane position is set to 10degrees discharge at the start-up of COOL operation. It can then be changed by the remote
controller.
(a) Stop mode (fixed operation)
(
!) At start-up of COOL operation, the auto vane is set to 10 degrees discharge direction.
(@) Discharge direction can be changed with AIR DISCHARGE UP/DOWN botton.
(b) SWING mode
(!) The vane motor turns ON when the SWING mode is selected.
The vane motor is continuously ON during SWING mode.
(@) When SWING mode is changed to STOP mode, the discharge direction returns to the position of the last STOP mode.
When 60 degrees or 70 degrees discharge is selected with the LOW fan speed in COOL operation, “Auto RETURN” will
appear below the temperature display. One hour later, the discharge direction returns to 10 degrees automatically and
“AUTO RETURN” will disappear. If the discharge direction is set to 10 degrees during “AUTO RETURN” indication, the
time counting for AUTO RETURN is cancelled.
1 Fan speed : LOW
2 Fan speed : HIGH
10°
discharge
60°
discharge
70°
discharge
10°
discharge
60°
discharge
70°
discharge
30°
discharge
<AUTO RETURN>
1 Fan speed : LOW
10°
discharge
60°
discharge
70°
discharge
2 Fan speed : HIGH
10°
discharge
60°
discharge
70°
discharge
30°
discharge
AUTO
RETURN
AUTO
RETURN
OC120--2.qxp 24/6/97 12:31 AM Page 33