Mitsubishi Electronics MSZ-A18YV Air Conditioner User Manual


 
4
ON/OFF
TOO
COOL
AMPM
CLOCK
˚C
AMPM
TOO
WARM
ON/OFF
FAN
TOO
WARM
TOO
COOL
VANE
MODE
ECONO COOL
STOP
START
HR.
MIN.
WIDE VANE
LONG
I FEEL
COOL
HEAT
DRY
AMPM
RESET CLOCK
Signal transmitting section
Operation display section
Temperature buttons
(This diagram shows an overall view.)
Open the front lid.
NAME OF EACH PART
Remote controller
PREPARATION BEFORE OPERATION
Auto restart function
These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, Auto restart function sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
Indoor unit
Insert the power supply plug into the power outlet and/or turn the breaker on.
WARNING:
Remove dirt from the power supply plug and insert the plug securely.
If dirt adheres to the plug or insertion is incomplete, it may cause a fire or an electric shock.
ON/OFF (operate/
stop) button
VANE button
(Horizontal vane button)
Fan speed control button
CLOCK set button
Operation select button
ECONO COOL button
WIDE VANE button
(Vertical vane button)
RESET button
Off-timer button
On-timer button
HR.button
MIN.button
(Time set buttons)
LONG button