Mitsubishi Electronics MS-SFD18VC Air Conditioner User Manual


 
En-6
ECONO COOL OPERATION
Press during COOL mode page 4 to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 2°C higher auto-
matically.
Press again to cancel ECONO COOL operation.
• Pressing or also cancels ECONO COOL operation.
What is “ECONO COOL”?
Swing air ow (change of air ow) makes you feel cooler than constant air ow.
So, even though the set temperature is automatically set 2°C higher, it is pos-
sible to perform cooling operation with keeping comfort. As a result, energy can
be saved.
LONG OPERATION
Press to start LONG operation.
• Fan speed increases and the horizontal vane moves to the position
for LONG mode.
• Air reaches to longer distance.
Press again to cancel LONG operation.
• LONG operation is cancelled when the following buttons are pressed:
ON/OFF button, VANE button, ECONO COOL button.
TIMER OPERATION (ON/OFF TIMER)
1
Press or during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
* or blinks.
* Make sure that the current time is set correctly. Page 3
2
Press (Increase) and (Decrease) to set the
time of timer.
Each press increases or decreases the set time by 10 minutes.
Press or again to cancel timer.
Note:
ON and OFF timers can be used in combination. mark indicates the order
of timer operations.
If power failure occurs while ON/OFF timer is set, see page 4 “Auto restart
function”