Mitsubishi Electronics MCF-D24VD Air Conditioner User Manual


 
En-5
• OPERATING INSTRUCTIONS •
Press to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
(AUTO) (Low) (Med.) (High)
1
( ) ( ) ( ) ( ) ( )
2 3 4 5
(AUTO) (SWING)
I FEEL
COOL
DRYFAN
I FEE
L
COOL
DRY
FAN
AMPM
AMPM
I FEEL
COOL
DRYFAN
I FEE
L
COO
L
DRY
FAN
AMPM
AMPM
TIMER OPERATION (ON/OFF TIMER)
1
Press or during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
* or blinks.
* Make sure that the current time is set correctly.
Page 3
2
Press and to set the time of timer.
Each time is pressed, the set time increases by 1 hour; each time
is pressed, the set time increases by 10 minutes.
3
Press or again to cancel timer.
Note:
ON and OFF timers can be used in combination. mark indicates the order
of timer operations.
If power failure occurs while ON/OFF timer is set, see page 4 “Auto restart
function”
Airflow direction
(AUTO) .............The vane is set to the most effi cient airfl ow direction.
Floor standing unit:
COOL/DRY: upward. FAN: horizontal.
Ceiling suspended unit:
COOL/DRY: horizontal. FAN: downward.
(Manual) .......
For effi cient air conditioning, select position 1 or 2 for COOL/DRY.
During COOL/DRY, when the vane is set to position 4 or 5,
vane automatically moves to position 1 after 1 hour to prevent
water dripping.
(Swing) .............The vane moves up and down intermittently.
To change the horizontal airfl ow direction.
Move the vertical vane manually before starting operation.
Floor standing unit Ceiling suspended unit
F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT