Filter
Top Products
9
3-3-2 Adjusting the operation conditions of every group
(1) Click [Batch Operation] from the operation condition monitoring
screen for air conditioners. If there are air conditioner groups and
LOSSNAY groups mixed together, a selection screen will appear
with the choice of all air conditioners or all LOSSNAY. Click either
[All Air-conditioners] or [All LOSNAY] to make your selection and
the screen for batch operation will appear.
This selection screen will not appear if there is only air conditioner
groups or LOSSNAY groups.
(2) After you have made the settings on the screen for batch
operation, click [OK] and only the items for which operation was
performed will be sent to all the air conditioner units. To return to
the previous screen without performing any operations, click
[Cancel].
Note: If the setting range for set temperature is restricted, the temperature
setting range will be smaller.
Note: If operation of an item has been prohibited, then operation is not
possible for that item.