Mitsubishi Electronics 20-MYA Air Conditioner User Manual


 
3
GB
D
F
SWI
NL
E
P
1. Safety precautions
1) Outdoor unit
Warning:
The outdoor unit must be installed on a stable, level surface, in a place
where there is no accumulation of snow, leaves or rubbish.
Do not stand on, or place any items on the unit. You may fall down or the
item may fall, causing injury.
Caution:
The outdoor unit should be installed in a location where air and noise emit-
ted by the unit will not disturb the neighbours.
2) Indoor unit
Warning:
The indoor unit should be securely installed. If the unit is loosely mounted, it
may fall, causing injury.
3) Remote controller
Warning:
The remote controller should be installed in such a way that children cannot
play with it.
4) Drain hose
Caution:
Make sure that the drain hose is installed so that drainage can go ahead
smoothly. Incorrect installation may result in water leakage, causing dam-
age to furniture.
5) Power line, fuse or circuit breaker
Warning:
Make sure that the unit is powered by a dedicated line. Other appliances
connected to the same line could cause an overload.
Make sure that there is a main power switch.
Be sure to adhere to the unit’s voltage and fuse or circuit breaker ratings.
Never use a piece of wire or a fuse with a higher rating than the one
specified.
6) Grounding
Caution:
The unit must be properly grounded. Never connect the grounding wire
to a gas pipe, water pipe, lightning conductor or telephone grounding
wire. If the unit is not grounded properly, electric shock may result.
Check frequently that the ground wire from the outdoor unit is properly
connected to both the unit’s ground terminal and the grounding elec-
trode.
s Before operating the unit, make sure you read all the “Safety
precautions”.
s “Safety precautions” lists important points about safety.
Please be sure to follow them.
Symbols used in the text
Warning:
Describes precautions that should be observed to avoid the risk of injury or
death to the user.
Caution:
Describes precautions that should be observed to prevent damage to the
unit.
Symbols used in the illustrations
: Indicates an action that must be avoided.
: Indicates that important instructions must be followed.
: Indicates a part which must be grounded.
: Indicates that caution should be taken with rotating parts. (This symbol is
displayed on the main unit label.) <Color: yellow>
: Beware of electric shock. (This symbol is displayed on the main unit label.)
<Color: yellow>
Warning:
Carefully read the labels affixed to the main unit.
1.1. Installation
s After you have read this manual, keep it and the Installation Manual in a
safe place for easy reference whenever a question arises. If the unit is
going to be operated by another person, make sure that this manual is
given to him or her.
Warning:
The unit should not be installed by the user. Ask the dealer or an author-
ized company to install the unit. If the unit is installed improperly, water
leakage, electric shock or fire may result.
Use only accessories authorized by Mitsubishi Electric and ask your
dealer or an authorized company to install them. If accessories are in-
stalled improperly, water leakage, electric shock or fire may result.
The Installation Manual details the suggested installation method. Any
structural alteration necessary for installation must comply with local
building code requirements.
Never repair the unit or transfer it to another site by yourself. If repair is
performed improperly, water leakage, electric shock or fire may result. If
you need to have the unit repaired or moved, consult your dealer.
The appliance is not intended for use by young children or infirm per-
sons without supervision.
Young children should be supervised to ensure that they do not play
with the appliance.
Contents
1. Safety precautions ...................................................................................... 3
1.1. Installation ................................................................................. 3
1.2. During operation ........................................................................ 4
1.3. Disposing of the unit .................................................................. 4
2. Names and functions of various parts ........................................................ 4
3. Operation .................................................................................................... 5
3.1. ON/OFF ..................................................................................... 6
3.2. Selecting operation.................................................................... 6
3.3. Room temperature adjustment .................................................. 7
3.4. Fan speed adjustment ............................................................... 7
3.5. Time setting ............................................................................... 7
3.6. Timer setting.............................................................................. 7
3.7. Others........................................................................................ 8
4. The smart way to use ................................................................................. 8
5. Caring for the machine ............................................................................... 8
6. Troubleshooting........................................................................................... 9
7. Troubleshooting [for wireless remote controller (option)] ............................ 9
8. Installation and transferring works, and checking ..................................... 10
9. Specifications ............................................................................................ 10