Filter
Top Products
7
Problem Possible Cause Possible Solution
The indicator is not lighting. The Evaporative Cooler Insert the plug into a power outlet and
is not connected to a make sure the outlet is switched on.
power outlet or the power
outlet is not switched on.
The circuit board is damaged. Do not attempt to fix the circuit board.
Send it to a qualified repair centre for
servicing.
The Evaporative Cooler The motor has over-heated. Allow the Evaporative Cooler time to
is not operating. cool before turning it on.
The louvre won't oscillate. The direction key has not been Press the direction key once. Press it
touched. again to turn the oscillating feature off.
The louvre motor is damaged. Do not attempt to fix the louvre motor.
Send it to a qualified repair centre for
servicing.
The temperature of air being The pump needs to be cleaned. Follow the directions under Care and
expelled from the Evaporative Cleaning to clean the pump.
Cooler is not cold enough.
The pump is damaged. Do not attempt to fix the pump. Send it
to a qualified repair centre for servicing.
The timer is not operating.
The dust-proof net is blocked. Follow the directions under Care and
Cleaning to clean the dust-proof net.
The fan type can't be operated. The evaporated net is blocked. Follow the directions under Care and
Cleaning to clean the evaporated net.
The speed can't be operated. The circuit board is damaged. Do not attempt to fix the circuit board.
Send it to a qualified repair centre for
servicing.
Troubleshooting