Filter
Top Products
Frequently asked questions
The vacuum cleaner shuts off
automatically.
A warning light § comes on to indi
-
cate overheating (see fig. 44).
A temperature sensor will turn off the
vacuum cleaner if it becomes too warm.
This is indicated by a thermal protection
indicator § on the display panel of the
vacuum.
This problem can occur if, for example,
an object is blocking the suction hose
or the filter bag pores have become
clogged with fine dust. The cause
could also be a heavily soiled exhaust
or dust compartment filter. If this
happens, turn off the vacuum cleaner
(press the On/Off foot switch s) and
unplug the power plug from the
electrical outlet.
Once the cause has been addressed,
allow the vacuum cleaner to cool for
approx. 20 - 30 minutes before
resuming vacuuming.
Technical service
In the event of a fault which you cannot fix
yourself please contact the Miele Service
Department at the phone number listed
on the back of this booklet.
^
Please quote the model type of your
appliance.
This can be found on the data plate on
the bottom of the vacuum.
Optional accessories
Always follow the flooring
manufacturer's cleaning and care
instructions.
You can order these and many other
products via the Miele website.
Some models come with the one or
more of the following accessories.
Powerbrushes
To connect a Powerbrush, you also
need :
– Electro telescopic wand SET 210 or
SET 220
– Electro hose SES 121
Powerbrush SEB 217-3 (EB02)
For intensive cleaning of heavy-duty
textile flooring. It removes ground-in
dirt and helps prevent matting in
high-traffic areas.
Powerbrush SEB 228 (EB03)
Compared to the SEB 217-3, this
Powerbrush also has a height
adjustment for adjusting to different
carpet heights and is particularly
suitable for cleaning large areas.
Powerbrush SEB 236 (EB01)
Compared to the SEB 228, this
Powerbrush also has a multifunction
control light and LEDs for illuminating
the work area.
en
20