Filter
Top Products
When to change the thread
catcher pads
Check the thread catchers on the
suction inlet of the floor brush, as well
as those on the upholstery nozzle, from
time to time.
Replace the thread catchers if the pile
is worn.
Replacing the thread catchers
^ Use a knife or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
Servicing the floor roller
^
Use a coin to release the roller pin
and pull out the pin.
^
Take out the roller.
Remove all threads, hair, etc. and
reassemble the parts.
Spare parts are available from your
Miele Vacuum Dealer or from the Miele
Technical Service Department.
Maintenance and care
39