Filter
Top Products
Replacing the "ACTIVE air
clean" filter and the "ACTIVE
HEPA" filter
^
Open the dust compartment lid.
^
Release the catch and remove the
filter.
^ Insert the new filter so that it engages
at the back, then close the catch.
^ Close the dust compartment lid firmly
until it clicks into place.
Resetting the filter change
indicator
The filter change indicator (Reset
button 7) must be reset each time the
filter is replaced. To do this, the vacuum
cleaner must be plugged in.
^
Press the filter change indicator light
until it goes out. The display is now
reset.
Maintenance and care
36