Filter
Top Products
Using the Powerbrush
The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
The Powerbrush can also be used on
smooth floor surfaces.
The standard floor brush or the Miele
parquet floorbrush should be used to
clean delicate hard flooring and floor
surfaces susceptible to scratching.
Do not use the powerbrush on:
– Floors with a variable or uneven
surface. The brush could come into
contact with the floor and cause
damage.
– High quality, hand knotted rugs, for
example Berber or Persian rugs, as
well as extremely long piled area
rugs and carpets. There is a danger
of the threads being pulled out. Turn
the Powerbrush off to vacuum these
types of floor coverings and use only
suction.
Connecting the Electro
Telescopic wand and the
Powerbrush
^
Insert the Electro Telescopic wand,
pointing down, into the Powerbrush
until it clicks into place.
For more information on use and
maintenance please refer to the
instructions supplied with the
Powerbrush.
Before using the vacuum cleaner
12