Filter
Top Products
Replacing the Active HEPA
filter
^
Open the dust compartment lid.
^
Raise the filter and remove it.
^ Replace with a new filter, and push it
down into place.
^ Close the dust compartment lid
firmly. It should click into place.
Resetting the exhaust filter change
indicator
The filter change indicator needs to be
reset each time the filter is replaced. To
do this the vacuum cleaner must be
switched on.
^
Press the reset button.
The exhaust filter change indicator
goes out and resets to zero.
The filter change indicator can only
be reset by pressing the reset button
after the light has come on. Pressing
the button at any other time will have
no effect.
Maintenance and care
26