Filter
Top Products
^
Press the stand-by button on the
handle.
The LED will go out, and the cleaner will
switch itself on again at the last selected
power level. The corresponding symbol
in the handle will light up green.
The lowest power level (Min.) can be
directly selected by pressing -, and the
highest power level (Max.) by pressing +.
To pause the appliance during
operation:
^
Press the Stand-by button on the
handle.
The LED on the handle will light up.
Adjusting the suction power
Use the + and - on the handle to
regulate the suction to suit the type of
flooring. The higher the wattage, the
more powerful the suction. Reducing
the suction power reduces the amount
of effort required to manoeuvre the
floorhead.
The power settings are denoted by
symbols on the handle which indicate
the type of use the settings are suitable
for.
a - curtains, lightweight fabrics
b - upholstery, cushions
c - carpets, rugs and runners
( - for daily energy-saving vacuuming
e - lightly soiled rugs and fitted
carpets
f - heavily soiled hard flooring, and
for intensive cleaning of carpets
Press and hold the appropriate button
until the symbol for the setting you
require lights up green.
^
Press the + button to select a higher
setting.
^
Press the - button to select a lower
setting.
Use
17