Filter
Top Products
– 6–
E) HANDLE HEIGHT AND BEATER BAR ADJUSTMENT
To lower the body of the cleaner, step on the foot pedal at the bottom left corner of the vacuum cleaner.
Once the body is reclined, the brush will automatically start to rotate.
If you wish to stop the beater bar, simple return the cleaner into the upright position. In case you want to
stop the beater bar while the cleaner is in the reclined position, push the beater bar stop pedal located on
the left side of the cleaning head, just above the foot pedal.
Your Miele vacuum cleaner has an
Automatic Height Adjustment, feature
which adjusts the cleaning head to the proper
height of any carpet pile.
This system allows you to move from one
carpeted area to another, without having to
make manual adjustments.
1. Upright position
The body should be in an
upright position when cleaning
tools are used.
2. Middle position
For normal cleaning, press the
foot pedal and pull back the
handle to a comfortable angle.
Release the pedal to lower the
cleaning head.
3. Low position
For cleaning under furniture,
press the pedal a second time
and lower the handle down to
the floor as shown.
F) AUTOMATIC HEIGHT ADJUSTMENT
To prevent scratching floors while using the vacuum cleaner on tiled or polished floors, two small wheels
are built into the base plate.
These two wheels also make it easy to slide the vacuum cleaner across carpeted floors.
G) FLOOR SCRATCH PREVENTION
ON
B
E
A
T
E
R
B
A
R
STOP
O
N
B
E
A
T
E
R
B
A
R
STOP
O
N
B
E
A
T
E
R
B
A
R
STOP
Tiled floor
Carpeted floor
ON
B
E
A
T
E
R
B
A
R
STOP
M.I.MIELE S179i 11/6/03 08:53 Página 6