Filter
Top Products
Burners
NEVER clean the burner parts in the
dishwasher.
Instead, take off all the removeable
parts of the burner, and clean them with
a soft sponge dipped in warm water
and some dish liquid.
Wipe the immoveable part of the burner
with a damp cloth.
Gently wipe the ignition electrode and
the thermocouple with a well wrung-out
cloth.
The ignition electrode must not get
wet, or the spark will be extinguished.
After cleaning, dry all surfaces with a
clean, soft cloth.
Be sure to dry off all the flame openings
as well.
Over time, the surface of the burner
covers will become somewhat more
matte. This is normal and does not
represent any material defect.
How to assemble the small, normal,
and power burners
^ Arrange the burner head b on the
lower part (base) of the burner d in
such a way that the thermocouple e
the ignition electrode f and the
retaining pins g align through the
holes in the burner head.
^ Place the burner cover b evenly onto
the burner head c, so that the
notches fit over the retaining pins. To
adjust the burner cover into place,
turn slightly left or right.
Once the burner cover is in the right
position, it will not move.
Be sure to assemble the burner parts in
the proper order.
Cleaning and care
21