Miele HS11 Vacuum Cleaner User Manual


 
Problem solving guide
The vacuum cleaner switches off
automatically.
On certain models, the overheating
warning light also comes on ,
(dia. 46).
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot. Some models also have a
warning light , which comes on to
indicate that it has overheated.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled dust
compartment or exhaust filter can also
be the cause of overheating. Switch the
vacuum cleaner off immediately using
the On/Off foot control s. Disconnect it
from the electricity supply. Switch it off
at the wall socket and unplug it.
After removing the cause, wait for
approx. 20 - 30 minutes to allow the
vacuum cleaner to cool down. It can
then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
your Miele retailer
or
Miele (see back cover for contact
details).
Please note that telephone calls may
be monitored or recorded for training
purposes (UK only).
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
purchase. However, you must activate
your cover by calling 0845 365 6640 or
registering online at www.miele.co.uk.
Optional accessories
Please observe the flooring
manufacturer's cleaning and care
instructions.
Miele accessories, including
floorheads, filters and dustbags are
available to order through your Miele
retailer, Miele or online at:
Certain models are supplied as
standard with one or more of the
following accessories:
Electrobrushes
Electrobrushes can only be used on
models fitted with an electrobrush
socket.
en
46