Miele CS 1034-1 Furnace User Manual


 
Stainless steel surfaces
Clean stainless steel surfaces using an
E-Cloth or with a solution of warm water
and a little washing-up liquid applied
with a soft sponge. In the case of
stubborn dried-on soiling, soak first.
Finally, dry with a soft cloth.
If necessary, the pad on the back of a
washing-up sponge can be used with
Miele cleaning agent for ceramic and
stainless steel hobs (see "Optional
accessories"). Apply with even
pressure following the direction of the
"grain".
To help prevent re-soiling, we
recommend using Miele stainless steel
conditioning agent after cleaning (see
"Optional accessories").
Apply sparingly with a soft cloth
following the instructions on the
packaging.
Printed surfaces (Flame symbols)
Remove any soiling which comes
into contact with the printed flame
symbols straight away. Soiling,
particularly salty food or liquid and
olive oil, can cause damage if left on
the printed surfaces for a long time.
Do not use the Miele ceramic and
stainless steel hob cleaning agent
on the printed flame symbols. This
would rub off the print.
Pan supports, control knobs
Remove the pan supports. Clean the
pan supports and the control knobs
with a solution of warm water and a little
washing-up liquid applied with a soft
sponge. Stubborn soiling should be
soaked first.
After cleaning dry all surfaces with a
clean cloth.
Do not clean the pan supports in a
dishwasher.
Cleaning and care
29