Filter
Top Products
User's Guide for A2xx with WinCe Build # 5 13
4.4.2 Printers
In the Control Panel double-click the Printers icon to open the "Add printer" dialog box. Double
click on the "Add Printer" icon to open the Printer Wizard. This wizard provides four major steps to
setup the printer.
Step 1: Select the Printer Port
By default there are 3 different printer ports: COM1, LPT1, Network, for your selection. Whenever
you add another printer, LPT2 will show in the port list, even if connected via USB.
Figure 20:Control Panel - Printers
Step 2: Select the Printer Model
Select the printer from the Manufacturers & Printers list.
Note: If your printer is not in the list, enable “User Defined” check box.
Figure 21:Control Panel – Printer Models