Filter
Top Products
1. Lift ball/downrod/fan into hanger bracket opening. NOTE: The tab opposite hanger bracket opening should fit in
slot on ball.
2. Make wire connections, (refer to section titled “Electrical Connections”).
3. Slide canopy up and fasten to hanger bracket with 4 screws provided.
8
INSTALLING THE FAN – DOWNROD STYLE
INSTALLATION OPTION #2: DOWNROD STYLE MOUNTING (CONT.)
WARNING: To avoid damaging the blade arms and blades, do not install them onto fan until fan is fastened to ceiling.
Ball
Ball slot
Hanger
bracket tab