Filter
Top Products
11
Side Screw (x3)
Switch Housing
Connector (plug) with Side Buckle
Switch Housing Hub
(bottom of motor)
Keyhole Slot (x3)
Connector (receptacle)
Pull Chain
Reverse Switch
Opening for
Reverse Switch
Optional Light Kit
screws into bottom
of Switch Housing
INSTALLATION OF REMOVABLE SWITCH HOUSING
NOTE: Be sure the power is off before installing.
1. Loosen the 3 side screws on switch housing hub halfway.
2. If installing light kit, carefully remove light kit plug in bottom of switch housing. Attach light kit to switch housing
per instructions supplied with light kit. See “Electrical Connections” for hook-up of light kit.
3. Connect the plug and receptacle and make sure side buckle snaps in place.
4. Attach the switch housing to the switch housing hub. Be sure to align the opening on the edge of switch housing
hub with reverse switch.
5. Align the side screws with keyhole slots on edge of switch housing and tighten the side screws.
6. Turn the power on. Your Regency Ceiling Fan is now ready to enjoy!