Makita XSV10 Vacuum Cleaner User Manual


 
When using an electrical appliance, basic precautions should always be followed, including
the following:
READ
ALL
INSTRUCTIONS
BEFORE
USING THIS APPLIANCE.
12.
Do not use without dust bag and/or filters in place.
13. Tum
off
all controls before unplugging.
nent ground such as a properly
grounded outlet box cover.
Whenever the adapter is used,
it
must be held in place by a metal
screw.
1.
2.
3.
4.
5.
6.
7.
9.
10.
11.
a.
kE-1
TAB FOR
OROUNDINO
SCREW
.~
~
14. Use extra care when cleaning on stairs.
15.
Do not use to pick up flammable or combustible liquids such
as
gasoline or use in areas
A
WARN
I
NG
-
TO
REDUCE THE
RISK
OF
FIRE, ELECTRIC
SHOCK
OR
INJURY:
where they may be present.
NOTE
IN CANADA, THE USE
OF
A
TEMPORARY ADAPTER
IS
NOT
PERMITTED BY THE CANADIAN
Do not leave appliance when plugged in. Unplug from outlet when not in
use
and before
servicing. Connect to a properly grounded outlet only. See Grounding
Instructions.
Do not expose to rain-store indoors.
Do not allow to be used
as
a toy. Close attention is necessary when used by or near
children.
Use
only as described in this manual. Use only Manufacturer’s recommended attachments.
Do not use with damaged cord or plug. If appliance is not working as
it
should, has been
dropped, damaged, left outdoors or dropped into water, return
it
to a service center.
Do not pull or carry by cord,
use
cord as a handle, close a door on cord or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated
surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug; not the cord.
Do
not
handle plug or appliance with wet hands.
Do not put any object into openings. Do not use with any openings blocked; keep free of
dost, lint, hair and anything that may reduce air flow.
Keep hair,
loose
clothing, fingers and all parts of body away from openings and moving
Pa&.
Do
not
pick up anything that is burning or smoking, such as cigarettes, matches or hot
ashes.
\-
-
OROUNOED
OUTLET
BOX
PIN
(A)
IS)
(CI
...
16.
Do
not
use
your cleaner as a sprayer of flammable liquids such as
oil
base paints,
lacquers, household cleaners, etc.
17.
Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such as
asbestos, arsenic, barium, beryllium, lead, pesticides or other health endangering
materials. Specially designed units
are
available for these purposes.
18.
Do not pick up wood or coal ash; soot, cement, plaster or drywall dust without
full
cloth
filter or collection filter bag in place. These are very fine particles that may pass through
the foam and disc filters and affect the performance of the motor or
be
exhausted back
into the air.
Full
cloth filters and additional collection filter bags are available (see
enclosed order form).
come a tripping hazard.
19.
Don’t leave lhe cord lying on the floor once you have finished the cleaning job.
It
can be-
20.
Use
special care when emptying heavily loaded tanks.
21. To avoid spontaneous combustion, empty tank after each use.
22. The operation of a utility vac can result in foreign objects being blown into eyes, which
can result in eye damage. Always wear safety goggles when operating vacuum.
23. STAY ALERT. Watch what you are doing and use common sense. Do not use vacuum
cleaner when you are tired, distracted or under the influence of drugs, alcohol
or
medication causing diminished control.
Volts
120v
When using the appliance at a distance where an extension cord becomes necessaiy, a
3-
conductor grounding cord of adequate size must be used for safety, and to prevent
loss
of
power and overheating.
Use
the table below to determine A.W.G. wire size required. Before
using appliance, inspect power cord for
loose
or exposed wires and damaged insulation.
This cleaner must be grounded. If
it
should malfunction or breakdown, grounding provides a
path of least resistance far electric current to reduce the risk of electric shock. This appliance
is equipped with a cord having an equipment-grounding conductor and grounding plug. The
plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
A
WARNING
-
IMPROPER CONNECTION
OF
THE
EQUIPMENT-
GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN
OR
SERVICE PERSON
IF
YOU ARE IN DOUBT AS TO WHETHER THE OUTLET
IS
PROPERLY
GROUNDED.
DO
NOT MODIFY THE PLUG PROVIDED WITH THE APPLI-
ANCE
-
IF IT WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET
INSTALLED BY A QUALIFIED ELECTRICIAN.
This cleaner is for use on a nominal 120-volt circuit, and has a grounded plug that looks like
Total
length of cord
in
feet
25 50 100 150
the plug illustrated in sketch A. A temporary adapter that looks like the adapter illustrated in
sketches
B
and C may be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet (sketch A) can be installed by a qualified electrician. The
Make any needed repairs or replacements before using your appliance. Use only three-wire
outdoor extension cords which have three-prong grounding-type plugs and three-pole recep-
tacks which accept the extension cord’s plug. When vacuuming liquids, be sure the exten-
SiOn cord connection
does
not come in contact with the liquid.
green colored rigid ear, lug or the
like extending from the adapter
must be connected to a perma-
Groundlnp
Methods
Ampere Rating
More
Not
More AWG
Than
Than
0-6 18
I
16 16 14
NOTE
STATIC SHOCKS ARE COMMON IN DRY AREAS
OR
WHEN THE RELATIVE HUMIDITY
OF
THE AIR
IS
LOW. THIS
IS
ONLY TEMPORARY AND DOES NOT AFFECT THE USE OF THE APPLI-
ANCE.
TO
REDUCE THE FREQUENCY OF STATIC SHOCKS IN
YOUR
HOME, THE BEST REMEDY
IS
TO ADD MOISTURE TO THE AIR WITH A CONSOLE
OR
INSTALLED HUMIDIFIER.
6-10
18 16 14 12
10-1 2
16 16 14 12
12-16
14 12
Not
recommended
Your Makita Industrial Vac comes
to
you completely assembled. Simply remove the machine
from the carton alter unpacking the accessories. (Note that some accessories may have been
packed in the tank.) However,
it
is necessary to attach the tank handles and assemble the
heavy-duty vac dolly. (Please see the instructions in this manual)