Filter
Top Products
5.
OPERATION
1.
After starting the engine, gradually open choke by turning the choke lever and
finally keep
it
open fully.
H
Do
not fully open the choke immediately when the engine is cold or the
ambient temperature is low, because the engine may stop.
2.
After the engine starts, set the speed
control lever at the low speed position
(L)
and warm it up without a load for a few
minutes.
Gradually move the speed control lever to-
ward the high speed position
(H)
and set it at
the required engine speed.
NOTE
:
Whenever high speed operation is not re-
quired, slow the engine down (idle), by mov-
ing the speed control lever to save fuel and
extend engine life.
EW400TR
Lock the control lever
by
turning wing nut clockwise.
EW400TR
-7-