Filter
Top Products
5
Switch action
1
009986
CAUTION:
• Before inserting the battery cartridge
into the tool, always check to see that
the switch trigger actuates properly and
returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger.
Release the switch trigger to stop.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched
off and the battery cartridge is removed
before carrying out any work on the tool.
Disposing of Dust
CAUTION:
• Empty the cleaner before it becomes
too full, or the suction force weakens.
• Be sure to empty out the dust inside the
cleaner itself. Failure to do so may
cause the filter to be clogged or the
motor to be damaged.
1
2
009992
In order to drop dust sticking on the filter in
the capsule, tap the capsule 4 or 5 times
with your hand.
1
2
009993
Now point suction inlet downwards, turn
capsule in direction of arrow in diagram, and
disconnect capsule slowly and straight.
NOTE:
• Dust may spill out when capsule is
opened, so be sure to set a garbage
bag beneath capsule.
1
2
009994
Remove accumulated dust from inside of
capsule and off of prefilter.
1
2
009995
Twist prefilter in direction of arrow to
unfasten securing lip from cleaner unit and
then pull off prefilter.
1. Prefilter
2. Securing lip
1. Prefilter
2. Capsule
1. Capsule
2. Suction inlet
1. Suction inlet
2. Capsule
1. Switch trigger