Filter
Top Products
4
7. Do not incinerate the battery
cartridge even if it is severely
damaged or is completely worn out.
The battery cartridge can explode in
a fire.
8. Be careful not to drop or strike
battery.
9. Do not use dropped or struck
battery.
SAVE THESE
INSTRUCTIONS.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before
completely discharged.
Always stop tool operation and
charge the battery cartridge when
you notice less tool power.
2. Never recharge a fully charged
battery cartridge.
Overcharging shortens the battery
service life.
3. Charge the battery cartridge with
room temperature at 10 ﾟ C - 40 ﾟ C
(50 ﾟ F - 104 ﾟ F). Let a hot battery
cartridge cool down before
charging it.
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched
off and the battery cartridge is removed
before adjusting or checking function on
the tool.
• Take care not to trap finger(s) between
cleaner and battery as shown in
diagram when loading battery.Trapping
finger(s) may cause injury.
010055
Installing or removing battery
cartridge
1
2
3
010054
• Always switch off the tool before
insertion or removal of the battery
cartridge.
• To remove the battery cartridge,
withdraw it from the tool while sliding
the button on the front of the cartridge.
• To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip it into
place. Always insert it all the way until it
locks in place with a little click. If you
can see the red part on the upper side
of the button, it is not locked completely.
Insert it fully until the red part cannot be
seen. If not, it may accidentally fall out
of the tool, causing injury to you or
someone around you.
• Do not use force when inserting the
battery cartridge. If the cartridge does
not slide in easily, it is not being inserted
correctly.
1. Red part
2. Battery cartridge
3. Button