Filter
Top Products
5
Installing dust bag
Place the dust bag into the cleaner cavity. (Fig.7)
Insert the holder of the dust bag all the way into the slots
in the cleaner cavity. (Fig.8)
CAUTION:
Forgetting to install the dust bag, failure to insert the
holder of the dust bag all the way into the slots or using a
broken or ripped bag, may allow dust to get into the
motor. This may result in motor failure.
Hook the front cover onto the front lip of the cleaner.
Then close the front cover. (Fig.9)
NOTE:
• When installing the paper filter, follow the same proce-
dures for the dust bag.
• Always unfold a new paper filter before installing it on
the cleaner.
Corner nozzle storage (Fig. 10)
When the not in use, the corner nozzle can be conve-
niently stored in the cleaner body.
Cleaning (Suction)
Nozzle (Fig.11)
Attach the nozzle to clean off tables, desks, furniture, etc.
Nozzle slips on easily.
Nozzle+Extension wand (Straight pipe) (Fig.12)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor while standing erect.
Corner nozzle (Fig.13)
Fit on the corner nozzle for cleaning corners and crevices
of a car or furniture.
Corner nozzle+Extension wand (Straight pipe)
(Fig.14)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
Possible to suck dust without nozzle, too. (Fig.15)
MAINTENANCE
CAUTION:
Always be sure that the cleaner is switched off and the
battery cartridge is removed before carrying out any work
on the cleaner.
After use (Fig.16)
When storing the cleaner, hang it from a nail using the
convenient hanger in back.
Cleaning (Fig.17)
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Never use gasoline, thinner or the like. Discoloration or
cracks may result.
Wash the dust bag in soapy water occasionally. Dry it out
thoroughly before use. An insufficiently dried bag may
cause poor suction and shorten the service life of the
motor.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a Makita
Authorized Service Center.