Filter
Top Products
1. Attach the stand base to the wall or ceiling where you want to install the
camera. Locate a wall stud or ceiling, and secure the bracket using the
three supplied screws.
2. Secure the camera to the bracket by sliding the camera socket over the stand, and
fasten it in place with the supplied screw.
3. Connect the supplied 9V DC adapter to the DC IN jack at the rear
of the camera, and plug it into an electrical outlet. Make sure the adapter connected
to the camera is labeled camera. You can turn the camera ON/OFF by holding the
Channel for 3 seconds.
5
To 9V Power
Adapter
Camera mounted
Wall
OPTION #1 – Permanent Wall Mount
OPTION #2 – Temporary Mounting
1. Connect the clip-on stand
onto any object.
STEP 1:
INSTALLATION OF CAMERA