Filter
Top Products
CONNECTING A RECEIVER TO A TV USING COAXIAL CABLES
INSTALLATION OF RECEIVER
B)
Back of Receiver
Television
Electrical Outlet
Coaxial Cable (75 ohm)
Ensure the Power Switch on the receiver is turned OFF prior to
proceeding with the following steps.
NOTE
1. Place the wireless receiver near your television (or monitor).
2. Connect one end of the coaxial cable to the back of the receiver. Plug the
other end of the coaxial cable to the television.
3. Connect one end of the supplied 9V AC adapter into the DC IN jack
at the back of the receiver; the other end into an electrical outlet. Turn the
receiver ON. The system is defaulted to channel 1.
4. Turn your TV to channel 3 to view the picture.
5. Adjust the antenna on the receiver if necessary for optimum viewing.
For optimum viewing reception you may need to change the
channels of your camera and receiver to the same channels
between CH1 – CH 4
NOTE
Audio Video
7