Filter
Top Products
8 Installation (For Qualified Installers Only)
© Travis Industries 4080728 100-01156
Clearances - Straight Installation
2”
Minimum**
6” Minimum
3” Minimum
9” Minimum
Through the Wall Installations Interior Vertical Vents
Floor Protection
6” Minimum
9” Minimum
“Tee”
Vent
Clearance*
Clearances - Corner Installation
6” Minimum
Through the Wall Vents
3” Minimum
3” Minimum
45° Elbow
45°
Interior Vertical Vents
3”
Minimum
6” Minimum
3”
Minimum
Floor Protection
“Tee”
Vent Clearance*
2”
Minimum**
* Install vent at clearance specified by the vent manufacturer.
NOTE: If interior vertical vent is used, the stove to backwall dimension is determined by the vent
being used. This dimension will vary depending on the brand of pellet vent used. To determine the
distance from the backwall to the stove, connect the "Tee" and add the vent clearance .
** The floor protection must extend 2” or to the wall (whichever is less) – all vent clearances must be met.