Filter
Top Products
16 Installation
Travis Industries 4050509 100-01145
Installation into a Factory Built (Metal) Fireplace
“L” Vent Flex Section
HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors from
entering the home.
“L” Vent
Storm Collar
Vertical Cap
Cover Plate (non-combustible)
Silicone
Seal the cover
plate with silicone.
The smoke shelf, shields,
damper, and baffles may
be removed
if attached
with mechanical
fasteners.
The firebrick (refractory)
may be removed.
The metal sides, frame members, or other
structural components of the factory built
fireplace may not be removed or altered.
The log grate,
screen (and rails),
and doors (if
present) must be
removed.
Use the telescoping legs to
support the insert on raised
fireplaces.
The metal floor of the firebox may
be removed
leaving the fireplace
floor outer wrap.
NOTE: The fixed spacers
under the appliance may not
be removed.