Filter
Top Products
1 Service
14
Service Manual
1 Service
Display panel parameter access
BUTTON
SCREEN
STATUS
OPERATION DISPLAY
This example shows how to access parameter Temperature Settings. The first display shown is at the beginning
of the menu listings, after entering the installer access code.
Rotate the NAVIGATION dial counterclockwise until
the arrow (>) is next to TEMPERATURE SETTINGS.
Press the NAVIGATION dial one time.
Rotate the NAVIGATION dial counterclockwise until
the arrow (>) is next to MIN SETPT.
Press the NAVIGATION dial one time.
Rotate the NAVIGATION dial to the desired temperature.
[SAVE] Press the RIGHT SELECT soft key [SAVE] one time.
[EXIT]
Press the LEFT SELECT soft key [EXIT] if all desired
changes have been made.
[HOME] Press the LEFT SELECT soft key [HOME].
Table 1-3 This is a typical example of accessing, adjusting, and saving a parameter, shown for parameter
Temperature Settings, MIN SH Setpt