LiftMaster LM1000A-2 Garage Door Opener User Manual


 





 230–240 V AC, 50 Hz
 800 N
 400 W
 2.6 W

 Motor with capacitor for start and operation

 Chain with two-piece trolley on steel rail
 adjustable up to 2.3 m or up to 5 m with appropriate extension
 100 mm per second
 turns on when the drive is activated; turns off 2.5 minutes after closing
 adjustable, trolley unlocking device

 by pressing a button during forward or backward run and obstacle detection
 automatic
 Transformer overload protection and low voltage cabling for accessories
 electronic, semi and fully automatic; optical detection of speed and
door position

 3.1 m
 30 mm
 14.5 kg

 8
 1 – keypad code memory
 433.92 MHz

Chamberlain strongly recommends to install
the protector system on all garage door openers!

9A5932
