Filter
Top Products
9
OPERATING INSTRUCTIONS
1. Engage the heater on by moving the Mode dial
on control panel clockwise to the Heat Position.
Power for heating is 750W.
Note: The flame effect will also be engaged in the
Heat position.
1
Heat
2. Set the thermostat by turning the Thermostat
dial clockwise or counter clockwise on the
control panel (C).
You can set the temperature on the heater
anywhere between (low) and (high) of the
thermostat. Turn the Thermosat dial towards
(low) or (high) to get a lower or higher desired
temperature. Once you have chosen the desired
temperature, the heater will cycle on and off
to maintain the desired room temperature. For
continuous heat, set the thermostat towards
(high).
2
Low High
3. To power on the flame effect only, move the dial
on the control panel clockwise to the Flame
position. The flame effect function can be set
when the heater is in the on or off mode.
3
Flame
4. Power OFF the heater by moving the dial on the
control panel (C) counter-clockwise to the OFF
Position.
Once the heater is off, heating elements, flame
effect, and fan will stop working. This is normal
function.
4
OFF