Filter
Top Products
has the following differentiating features
• Air induction and dischange is combined on the same side, allowing easy installation to a louvered wall
without the need to install expensive and time consuming duct work.
• Powerful sirocco fans discharge the air to the left and right, preventing air short cycling between units
installed next to each other and between floors.
• Fully inverter driven for higher efficiency and reduced operation noise.
• Piping can exit the unit from the left or right front panels, depending on installation requirements.
• Because of the design of , less area is actually required for the installation of the unit,
compared to convential systems installed in the same way.
• The External Static Pressure on the fans can be increased up to 140 pascals if ducting is required to be
fitted to the outdoor unit. This is done by carrying out a setting on the main PCB.
Cutting edge technology and design set a new
standard for outdoor units
Unlike existing units which are awkward when matched with
internal installation applications (due to ducting configuration
and the problems faced with three sided air induction), the
design greatly reducess installation area
requirement, meaning floor space can be retained for
living/working area, rather than wasted as a plant room.
44_ Air conditioning system
61799 LG Multi V Catalogue 4/5/07 2:17 pm Page 44