Filter
Top Products
Outdoor
unit
Air conditioning system _35
Outdoor unit
Zoning after building alterations
Because each indoor unit has the ability to change mode whenever it chooses to do so, if the
building layout changes (more partitions are installed), the indoor units will control
individually as before. With conventional systems (designed only to the previous building
layout), simultaneous heating and cooling may not always be possible.
- Max. 3 minutes! - About 20 minutes!
Cooling
Heating
Cooling
Heating
Conventional
Conventional
Free Zoning !
Inconvenient
Zoning !
Same operation
in the different zones
Fast mode change response
When the operating mode of an indoor unit is changed (i.e. from cooling to heating or visa
versa), the response time of the mode change is fast compared to conventional systems. Not only
is it fast for the room concerned, but also there is little or no capacity loss for all other units on
the system. Therefore mode changes can happen comfortably and quickly for the entire system,
regardless of seasonal conditions.
61799 LG Multi V Catalogue 4/5/07 2:17 pm Page 35