Filter
Top Products
14 AHU CONTROL KIT
Supplementary function of wired remote controller
Press the Additional Operation
button.
1
Set the Function Code of
Display ‘C’ to 02.
2
Press the Up/Down button to set
the target CO
2 level.
3
Press the OK/CLEAR button to
set the target CO
2 level.
4
C
Display C: CO2 level
(Function set by code)
* Code 02: Desired CO
2 level
: Desired CO
2 level
Function
Code
Setting
(Example)
<Desired CO2 level: 500ppm>
Desired CO
2
level control
* Desired CO2 level can be controlled in the range
of 500~1500ppm by 100ppm increment.
* Default humidity is set to 1000ppm.